ResMed AirFit™ N10 Nasal CPAP Mask with Headgear

This product has been discontinued. We suggest the ResMed AirFit N20 Nasal CPAP Mask

Note: This mask uses magnets. Please read ResMed's statement on mask safety.

ResMed AirFit N10 Nasal CPAP Mask - Overview

The ResMed AirFit family of CPAP masks have long been customer favorites, due to their innovative design and comfortable fit. The AirFit N10 Nasal CPAP Mask is no exception. Even the most novice CPAP users will love the ease of use this mask offers. Simply slip out of the mask using magnetic headgear clips and never fumble with headgear adjustments again.

ResMed AirFit N10 Nasal CPAP Mask - Features

Magnetic Clips for Easy Removal

EasyClick technology takes the hassle out of mask removal. Magnetic clips allow for a simpler operation so any user can remove the headgear from the frame without complications. Simply press the button on the AirFit N10 mask frame to disconnect. Perfect if you need to readjust your mask in the middle of the night, or you are finished therapy in the morning – the ResMed AirFit N10 is easy to adjust no matter who you are.

Comfort from Cushion to Headgear

The SpringAir cushions offer optimal comfort and a secure seal. The soft cushion reduces red marks and nose bridge irritation while maintaining a secure seal all night. And with SoftEdge headgear you enjoy a soft-knit material that doesn’t leave unsightly red marks or contact soreness. More comfort means lasting CPAP compliance every night.

Flexible Tube Let You Move While You Sleep

Perfect for active sleepers, the flexible tubing of the ResMed AirFit N10 lets you change sleeping positions without accidentally disconnecting or breaking your CPAP hose. The specialized tubing is designed to twist, turn, and move with you 360 degrees, so you can rest assured you will never compromise your CPAP therapy.

Why Patients Switch to the ResMed AirFit ™ N10 Nasal CPAP Mask

Users who are active sleepers who need more freedom of movement

Users with difficult masks that need something simpler

Users who want a quieter nasal mask

Users who prefer a clear line of sight for pre-bedtime activities during CPAP

AirFit N10 Nasal CPAP Mask - Fitting

Align the bottom of the cushion opening with the bottom of your nose, with the grey side of the headgear facing outward and the lower headgear straps released.

Cover your nose with the mask. Pull the headgear over your head.

Headgear check: When putting on the headgear, make sure the label is facing outwards.

Pull the lower straps down to your earlobes. Attach the magnet clip to the frame's exterior.

Undo the fastening tabs on the lower and upper headgear straps. Adjust the straps equally until the mask fits snugly on your nose. Reattach the fastening tabs.

Connect your CPAP device’s tube to the free end of the mask short tube assembly. Make sure your device is blowing air when you turn it on.

Adjust the cushion and headgear so the mask is not creased or twisted and lies nicely on your nose. If you feel air venting from the sides of the cushion or into your eyes, readjust the headgear straps for a secure seal.

Notes

The upper straps are the most important modifications for comfort and seal.

Make sure they're not too stiff.

The lower straps are used to maintain the cushion's position.

For the mask to fit easily, they don't need to be tightened very much.

Removing AirFit™ N10 Nasal CPAP Mask

Twist the lower headgear strap and clip away from the magnets on the frame.

Pull the mask back over your head and away from your face.

Disassembling AirFit™ N10 Nasal CPAP Mask

Remove the headgear from the frame by disconnecting the upper straps and lower magnetic clips.

Squeeze the cushion and pull it away from the frame.

If soft sleeves are on the frame, simply slip them off.

Reassembling AirFit™ N10 Nasal CPAP Mask

Insert the top and bottom clips into the correct slots on the frame to secure the cushion to the frame.

Pull the optional soft sleeves over the frame's upper arms to fit.

Thread the top headgear straps into the frame slots from the inside out, with the ResMed logo facing out. To secure the Velcro strap, fold it over.

Thread the lower headgear straps into the slots with the magnet clips facing down to reattach the magnet clips to the headgear. To secure the strap, fold it over.

Cleaning AirFit™ N10 Nasal CPAP Mask with Headgear at Home

Hand-wash your mask and headgear in warm water with a mild soap. All components should be thoroughly rinsed with water and air-dried, away from direct sunlight.

Always use gentle soap and follow the cleaning instructions. Some cleaning products can harm the mask, its components, and its function, as well as leave harmful residual vapors that can be inhaled if not properly rinsed. If a system component shows signs of deterioration (cracking, crazing, tears, etc. ), it should be discarded and replaced.

Daily/After each use:

Facial oils should be cleaned from the cushion during use to improve the mask seal.

Hand-wash the mask components that have been separated (excluding headgear and soft sleeves).

Use a soft bristle brush to clean the vent or swivel if necessary.

Weekly

Hand wash the headgear and soft sleeves once a week. The headgear can be wiped without having to take it apart.