ResMed AirFit N30i Mask with Headgear

NOW SHIPPING WITH IMPROVED CUSHION DESIGN

QuietAir vent Technology - 57% quieter than the original cushion.

The ResMed AirFit N30i nasal mask supports your nose and provides the freedom to sleep in your favorite position without the tube getting in your way. Head frame is available in Small as well as Standard size whereas the nasal cushion comes in three variants- small, medium, and small wide.

The ResMed AirFitTM N30i has a groundbreaking tube design, which places the tube at the top-of-the-head. The air from the CPAP machine is supplied by a SpringFit framework rather than from below. Most of the tube is at the back, which allows you to sleep comfortably on your stomach or on either side. The top-of-the-head elbow connection can rotate 360o, and gives you even more mobility. Now you can watch TV or wear glasses so that you can read a newspaper or your favorite book. The low-profile frame and tube design of this mask help to reduce feelings of claustrophobia.

The flexible CPAP mask that fits your sleeping position

No matter how you like to sleep, the ResMed AirFit N30i is dynamic enough to adjust to your position, from side to back to stomach. And the top of the head tube connection lets you change your position freely, making this nasal mask ideal for active sleepers.

Connected at the top so you are free to move

The tube connection at the top of the head swivels with any motion in 360 degrees. So, as you change sleeping positions, the headgear and mask move with you. No tangles. No twists or disconnections to interrupt your sleep or CPAP therapy.

Low profile design

A minimized under the nose profile means more visibility. Wear glasses comfortably. Watch TV or read without visual obstruction. You can easily wear your CPAP mask while settling into bed. In addition to the open field of vision, this low profile design also provides minimal facial contact. Less contact means less skin irritation and red marks.

Nasal cushions that cradle

The soft nasal cushions gently cradle the nose comfortably and with complete stability. Along with providing a lasting seal all night long, they also fit without leaving soreness or red marks. Choose from three sizes: small, medium, and small wide for the perfect fit.

Septum bridge membrane

This added design element provides a more stable seal. Consistent seal performance ensures reliable CPAP compliance with every use.

Quieter CPAP mask

Using pinhole vents, the AirFit N30i diffuses air when you exhale, reducing noise. You and your bed partner can sleep more soundly.

Quick release for easy removal

When you need to get up in the middle of the night, the quick release elbow lets you remove your connection quickly and reattach easily without any mask adjustments.

A more flexible frame for a versatile fit

The special SpringFit frame adapts to different face sizes and shapes so fitting and adjusting is much easier. A sizing guide helps you make customized adjustments to fit you perfectly.

Soft and stable frame

A combination of built-in soft sleeves and integrated chassis provide the ideal blend of comfort and support without additional parts.

Fitting Your AirFit N30i Mask

1. Pull the headgear and frame over your head, until the headgear is at the back of your head and the elbow is on top.
2. Set the cushion under the nose and align the AirFit N30i cushion comfortably under your nose.
3. Tighten or loosen the headgear until the cushion fits under your nose comfortably.
4. Press the side buttons on the elbow and fit the frame. Attach the air tube to the elbow and connect it to the frame.

Adjusting your AirFit N30i mask with Headgear

Air flows from the vents in the pillow and the elbow while wearing the mask. Change the fit of the mask to strengthen the seal if the air escapes from the side or from the top of the cushion.

The frame top may be pushed forward or back over the head until the mask is secure.

Cleaning your AirFit N30i mask with Headgear

Weekly: Headgear, frame and elbow

1. Soak the pieces with a mild detergent in warm water. Make sure no air bubbles are present while soaking.
2. Clean the components using a soft bristled brush. Pay attention to the vent holes in particular while cleaning.
3. Rinse the mask parts with running water../span>
4. To extract excess water, squeeze in the frame sleeves with a clean towel. Shake the QuietAir vent to eliminate excess water. Let the mask components air dry away from direct sunlight. Repeat cleaning procedures if the components of the mask are not visibly clean.

Reassembling your ResMed AirFit N30i

1. Attach the elbow up to the top of the frame.
2. Place the headgear strap in the structure and fold the tabs back.
3. Insert the frame ends into the cushion so that the arrows on the cushion and frame align.
4. Reinsert into the top of the frame when the elbow ring is removed.
5. Reinsert the QuietAir vent into the cushion if it was withdrawn from the AirFit N30i mask.

Package Includes:

• Mask frame
• Headgear
• Mask cushions