ResMed Mirage Quattro Full Face CPAP Mask Overview

Find the perfect fit for your face with the ResMed Mirage Quattro™ Full Face Mask. The adaptable, customizable design contours to unique face shapes using dual wall spring air technology. An innovative chin membrane flexibly adapts to jaw drop during sleep. Make accurate adjustments to shape the mask to your forehead and face for a secure seal and good night’s rest.

ResMed Mirage Quattro Full Face CPAP Mask Features

Adjustable and Easy to Use

The Mirage Quattro features a dial setting that lets you adjust precisely to your comfort fit. The MicroFit dial takes the guesswork out of adjustment and makes it one of the easiest masks to customize for comfort. Simply turn the dial to tighten or loosen the forehead support bar. This will ensure a secure seal and a comfortable fit.

Secure, Contoured Seal

The streamlined design contours all face shapes to maintain a secure seal all night long. Using dual-wall Spring Air cushion technology, the cushions hug the face for comfort and consistent performance free of leaks.

Adapts to Jaw Drop

The unique chin membrane allows the mask to accommodate a dropped jaw while sleeping. Mouth breathers will find the feature helpful for preventing leakage.

Pick the Perfect Size

The ResMed Mirage Quattro™ Full Face Mask with Headgear comes in a variety of sizes to fit different users including XS, S, M, and L.

Includes Guides for Easy Use

The ResMed Mirage Quattro™ Full Face Mask with Headgear includes guides for fitting, use, sizing, and replacement parts.

Warranty of ResMed Mirage Quattro Full Face Mask

• CPAP Masks: 90-days from the date of purchase

ResMed Mirage Quattro Full Face CPAP Mask Benefits

The Mirage Quattro fits all face sizes and shapes. Just customize with the MicroFit Dial. Fits more than 95% of users.

The contoured seal never quits. The special dual-wall cushions shape the face so the seal never leaks due to odd-face angles. Maintain your CPAP compliance worry-free.

Perfect for mouth-breathers. This full-face CPAP mask adapts to jaw drop so you never lose your seal when you sleep with your mouth open.

Quiet design. The integrated air vents diffuse exhaled air to keep CPAP performance quiet. You and your bed partner can sleep peacefully.

Optimizing the ResMed Mirage Quattro Mask Seal for Comfort

• Check to make sure there is no oil or dirt build-up. Facial oils can affect the mask seal if they are not cleaned off of the cushion. Clean your mask daily.
• Check to see if the headgear straps are overtightened. It is recommended that you keep the headgear in the same position as was set by your clinician.
• Make slight adjustments to the dial if necessary. Once you have found the most comfortable dial setting, you should not have to change it.
• If you are not able to close your eyes after putting on the mask, that means you need a different size mask.
• If you are still facing problems with the fitting of your mask, refer to the troubleshooting part in the user manual or contact your clinician.
• Removing the ResMed Mirage Quattro
• Disconnect one of the lower headgear clips to remove the Mirage Quattro, and bring the mask and headgear up above your head.

Cleaning the Mirage Quattro Full Face Mask

Daily/After Each Use

Before using, the cushion should be wiped to get rid of facial oils. This will help to optimize the mask seal. Hand washes the mask in a solution of diluted dishwashing detergent and warm (86°F/30°C) water.

During washing, do not twist the valve because this can harm or break the valve hinge or membrane. Always handle the valve with caution.

Use a soft-bristled brush to clean the vent.

Rinse all components with water and allow them to dry in the air away from direct sunlight.

Weekly

Hand washes the headgear using mild soap or diluted dishwashing detergent in warm (approx. 86°F/30°C) water. Rinse and allow it to air dry away from direct sunlight.

Disassembling the ResMed Mirage Quattro

• Start by separating the tubing from the mask.
• Hold the lower headgear and unclip the clips, then unhook the straps of the upper headgear.
• Squeeze the cushion clip and push the upper side tabs. Pivot the headgear away from the mask, and gently remove it. It is not essential to remove the clips of the headgear
• Now, take out the mask assembly from the mask frame. Instead of pulling the elbow straight off, it is easier to swivel the bottom of the elbow.
• From the elbow, disconnect the valve clip.
• Without tugging on the membrane, strip off the clip from the valve.
• Remove the elbow from the swivel.
• For the next time you use the mask, make a note of the dial position.
• Unscrew and remove the dial, then take the front of the frame away from the mask.
• Remove the front support pads from the forehead support.
• Remove the cushion from the cushion clip.
• Remove the mask frame port caps.

 This Package Includes: Complete ResMed Quattro Full Face mask with & Headgear

• Mask Frame
• Headgear
• Cushion and Clip
• Forehead pad and assembly
• Elbow Assembly