A new design that takes the bulk out of full face CPAP masks

The smaller design of the ResMed Quattro FX makes for a lighter, less bulky fit for full face CPAP mask users. No forehead supports are necessary, and the Spring Airframe provides a clear field of vision and reduced facial contact for less irritation and a more comfortable full face CPAP mask experience.

A frame that contours

With contoured cushioning, ResMed’s Spring Airframe offers more adjustability over standard full face masks. Forehead supports that used to irritate the skin are gone. The more comfortable headgear molds around the crown of your head for a reduced-size full face mask fit.

Dual-wall cushions for air pressure distribution

The Quattro FX maintains even air pressure distribution all night long. Movements during sleep do not affect the stable and secure air pressure delivery. This air pressure feature also means quieter mask operation, as leaks are less common thanks to the dual-wall cushions.

No red marks on the face

With the minimized design, ResMed Quattro FX users will experience fewer red marks and irritation from mask contact. The mask does not obstruct your view, so you can comfortably watch TV, read or wear eyeglasses during CPAP therapy.

Sizing your full face CPAP mask

Choose from three different Quattro FX mask sizes. Don’t know what size mask you need? With your mouth open, measure from the bridge of your nose to halfway between your bottom lip and chin. The measurement should match one of these options:

• 61700 Small Size = 3.5 inches
• 61701 Medium Size = 4 inches
• 61702 Large Size = 4 3/8 inches

Fitting the ResMed Quattro FX Full Face Mask

Remove the spring frame help guide from the back of your mask before fitting your mask and save it for future use. Refer to the section of examples in the user manual to better fit your mask for comfort.

Fitting Steps for the ResMed Quattro FX Full Face Mask

1. Place your mask against your face with the lower headgear clips released. Position the mask so the top of the cushion rests on the bridge of your nose and the lower portion sits between your bottom lip and chin.
2. As you hold the cushion in place, pull the headgear up and over your head. Feed the lower headgear straps beneath your ears and clip them into place on the cushion frame.
3. Use the Velcro straps to adjust your headgear so the mask sits securely on your face. Don’t overtighten; pulling too tightly will create face marks and may result in air leaks during therapy. The mask should feel secure, yet still be able to move with you as you change sleeping positions.

Headgear and cushion check

• In order to guarantee the proper placement of the headgear refer to the diagrams for the headgear in the user manual.
• The mask is supposed to be positioned in the center of the bridge of the nose.

Removing your Quattro FX Full Face Mask

To remove your ResMed Quattro FX, unclip the bottom headgear clips and slip the headgear and mask over your head.

Disassembly

Detach the air tubing and loosen the bottom headgear clips from the spring frame before you disassemble your mask. See the diagrams for disassembly in the user guide.

Steps for Disassembly of ResMed Quattro FX Full Face

• Remove the elbow from the mask frame. Disconnect the tube adaptor.
• Remove the headgear and the soft sleeves from the mask frame with care.
• Carefully separate the cushion from the frame.

Cleaning Your Quattro FX Full FaceMask in the Home

• Hand-wash the mask and headgear in the following manner.
• Disassemble the elements of the mask according to the instructions in the user manual.
• Clean the mask components (except the headgear) completely by scrubbing them with mild soap in warm water.
• The idea is to remove any facial oils from the cushion after use to optimize the mask seal.
• To clean the ventilation, use a brush with soft bristles.
• Inspect each part and wash it until it looks clean.
• Rinse the mask components with clean water, then allow them to air-dry.
• Reassemble according to the instructions for reassembly, after all parts are dry.

Weekly

Headgear should be hand washed. It can be cleaned without dismantling the whole mask.

Soft sleeves should be cleaned by hand.

ResMed Quattro FX Benefits

It’s as easy as Size & Seal

ResMed Quattro FX provides you with the tools to better suit your needs every time. The personalized sizing instrument and the simple fitting process make sizing, fitting, and getting a secure seal simpler for you.

Time and cost savings

The Spring AirTM cushion and Spring framework's suspension-like combination means forehead support is not required. The Quattro FX full face mask's fit is simple and stronger, secure cushions means less money spent on replacements.

Therapy acceptance

The ease, performance, and transparency provided by Quattro FX enable users to embrace and progress with their CPAP therapy.

Quality and performance retained

Using the new technology offered by the Spring Air and the Spring Frames, stabilization without the standard front brace is achieved. It is a less interfering face mask, more comfortable and the Quattro FX provides consistency and quality.

Freedom to be

Fewer touchpoints decrease the chances of skin irritation. Direct vision assists in breaking down the claustrophobia that can occur with less open full face mask therapy.

A good night’s sleep

The high-tech air-coated Spring Air distributes pressure equally and eliminates even the smallest user vibrations, allowing people to sleep soundly knowing their mask has a secure seal.

This Package Includes: Comlpete ResMed Quattro FX Full Face mask with & Headgear

Mask Frame

Cushion

Headgear

Elbow assembly