Choose a full-face CPAP mask with the benefits of a nasal pillow CPAP mask. The Philips Respironics Amara View uses a first-of-its-kind design that combines all the preferred aspects of a full-face mask and nasal pillow in one.

Hybrid CPAP Mask Design

The one-piece cushion design secures the area around the mouth while providing positive pressure in the nose, so you get a full face mask seal with nasal cushion air delivery. This unique design has since been adopted by other masks and manufacturers but was the first of its kind.

Low Profile

The design also eliminates forehead stability bars found on traditional full-face masks for a lower profile and clear field of vision. Now you can see clearly during CPAP therapy as you can watch TV or read before going to bed. Users who wear eyeglasses will find that they can do so comfortably.

Reduced Facial Contact

With fewer contact points, you can wake up in the morning without red marks on the bridge of your nose or pressure marks on your face.

Quiet Exhalation

While providing the secure seal of a full face mask the Respironics Amara View also ensures quiet performance, especially when breathing out. The design diffuses air to minimize exhalation noise so you and your bed partner can sleep peacefully.

Find the Perfect Fit

The single modular frame fits most users. Select from the small, medium, or large cushions. This full-face CPAP mask is one of the most preferred by users simply because of its comfortable and effortless fit thanks to a universal frame design. The lightweight frame is also simple to disassemble and reassemble for easier cleaning. Just pop the cushion off of the frame to clean and press firmly in place until you hear a click to reattach.

Quick Disconnect Tube

When you need to get up in the middle of the night, the quick disconnect tube makes it easy to remove your mask without needing to readjust your headgear. Simply press the tabs on the short tube to disconnect the mask. When you are ready to continue CPAP therapy, slide the short tube back into place until you hear a soft click.

Comfortable Headgear with Magnetic Clips

The headgear provided is soft, stretchable, and breathable. This means that you can comfortably wear it for up to six months before it wears out. The five points of adjustable Velcro allow users to find the perfect fit every single time, no matter their face shape. Magnetic clips attach the headgear to the cushion, again making it easy to put on or remove the Amara View.

Amara View is a minimal contact full face mask that provides therapy through the nose and mouth while minimizing face contact. Before using the Amara View Mask, connect the mask to your device, and turn on the air to verify that the anti-asphyxia valve is functioning properly. The flapper should lie flat to allow room air to flow in and out and then rise to cover the air inlet when a CPAP or bilevel device is providing air.

Respironics Amara Mask Fitting Tips

• Loosen the headgear to the largest setting prior to using the mask for the first time.
• Disconnect the headgear clips from the frame by twisting them backward.
• The mask will fit straight under your nose and over your lips against your face.
• Place the mask over the top of the cushion, not through the nostril opening.
• Push the headgear over your head by keeping the cushion in place against your face.
• Push the mask cushion up into place so that the wide opening lies over the mouth.
• Press the headgear clips into place while the mask is in position.
• Adjust both the top and lower side straps by pulling on the tabs.
• The headgear should feel loose and comfortable.
• Be mindful of over-tightening, which is a frequent mistake.

Adjusting Amara View CPAP Mask Crown Strap

The crown strap is very important in achieving a proper seal. To adjust the crown strap, use the tab located at the top of your head.

This will move the mask upward closer to the bottom of your nose. Make final adjustments by evenly adjusting the top and bottom side straps. When properly fit you should be able to slide a finger underneath the top and bottom side straps.

Connect the mask quick-release tube to the device's tubing. Turn on the airflow and lie down for final adjustments. Breathe normally through your nose keeping your mouth slightly opened. With your therapy pressure at the prescribed level, turn your head from side to side and identify any leaks that may interfere with sleep to remove the mask. Disconnect the headgear clips and pull the headgear over the top of your head.

Top Benefits for Full Face CPAP Mask Users

• Reduced facial irritation
• More comfort during CPAP therapy
• Less time and effort with fitting

Package Includes with Amara View Full Face CPAP Mask:

• Mask Frame
• Mask Cushion
• Headgear
• Short Mask Tube
• Magnetic Headgear Clips