ResMed AirSense 10 AutoSet CPAP Machine

The Auto CPAP (auto-titrating) is capable of delivering a pressure of 4-20 cm.

Yes, it is compatible with any mask from any manufacturer.

Yes, the AirSense10 is FAA approved and can be brought on an airplane as a carry-on. You can even use the AirSense10 during your flight with our FAA approved.

The SmartStart™ function begins your sleep apnea therapy as soon as you breathe into your mask. When you remove your mask, it stops automatically after a few seconds.

Expiratory pressure relief (EPR™) maintains regular pressure while you inhale and reduces pressure to make it easier when exhaling.

No, the AirSense 10 doesn’t include any mask. You have to purchase the mask separately. However, we do offer bundles with masks and other parts at special discounts. Call our customer support for more information.

The AirSense 10 will work with an AC Power input of 100-240V, which is typically found in most US households. It comes with a standard 90W power supply. This is the only power supply you should use to power the device.

The CPAP does not accept insurance. We do provide all the billing codes if you are interested in submitting them to insurance for reimbursement.

The device should be cleaned weekly. To clean, wipe down the exterior of the machine with a non-abrasive, dry cloth. The water chamber and tubing can be removed from the device and actively washed with warm water and a mild detergent. Let items dry completely before reassembling your machine.
For instructions on cleaning your CPAP mask, refer to your mask user guide for best practices.

Effective February 1, 2020, ResMed’s limited warranty will exclude damage to machines caused by using an ozone cleaning device. In response, SoClean has said that it will cover the cost for 3 years in the unlikely event that ozone from its device damages the ResMed AirSense 10.

The ResMed AirSense 10 AutoSet CPAP Machine is compatible with all CPAP masks from top manufacturers.

To access comfort settings and features on the ResMed AirSense 10, simply use the dial on the front of the device until the “My Options” menu selection is highlighted blue. Press the center of the dial to access that menu selection. From there, you will be able to access features such as ramp time, h= level, tube temperature settings (if using a heated tube), EPR settings, and more.

This option can be accessed from the “My Options” menu selection on the AirSense 10. Simply highlight “My Options” and press the dial to access the menu and change settings.

This option can be accessed from the “My Options” menu selection on the AirSense 10. Simply highlight “My Options” and press the dial to access the menu and change settings.