Respironics M Series, PR System One 60 Series & SleepEasy Reusable Foam Filters

These reusable foam filters are compatible with the following Respironics machines:

• All M Series CPAP and Bipap Machines
• All PR System One Series CPAP and Bipap Machines
• SleepEasy CPAP Machines
  That includes M Series: Plus, Pro, Auto, Bipap Auto and Bipap Plus.
• 2 foam Filters per package

Dimensions:  1 11/16” x 1”

Which Way Does the Filter Go?

Grey Foam Washable Filter: 

• This filter should be placed on top of the white filter. 
• When properly inserted, you should only see the grey foam filter and a small section of the white tab.

How Often Should I Clean the Filters?

Clean the gray foam filter at least once every two weeks and replace it with a new one every six months. The white ultra-fine filter is disposable and should be replaced after 30 nights of use or sooner if it appears dirty. DO NOT clean the ultra-fine filter. Wash the gray foam filter in warm water with a mild detergent. Rinse thoroughly to remove all detergent residue. Never install a wet filter into the device; it should be completely dry before reinstalling it. If the foam or white filter is torn, replace it.

Caution: Dirty inlet filters may cause high operating temperatures that may affect device performance. Regularly examine the inlet filters as needed for integrity and cleanliness.