Please note this item IS NOT eligible for further discounts.

This air purifier is up to 3,000 times more effective than HEPA standards, eliminating up to 99.9999% of allergens, viruses, bacteria, mold, and dust* before you breathe them in. Lightweight and portable, move the SoClean Air Purifier from room to room to replace odors with clean, fresh air.

Featuring Celios Advanced Air Purification Technology

The SoClean Air Purifier features a cordless design, so you can breathe clean, pure air wherever your day takes you. Easy to maintain and assemble—no tools required.

Long Lasting Battery

The long-lasting lithium-Ion smart battery lasts up to 24 hours. So, if you are planning a road trip or have a long commute, you can take the SoClean Air purifier with you.

Portable SoClean Air Purifier is Easy to Carry

Smaller dimensions mean that you can easily carry this air purifier from place to place. You can take it with you to your office where you can keep it in your cubicle. When you are home, you can leave it on and go to sleep peacefully, knowing that you are breathing pure air.

Air Purification by Mechanically Filtered Air
 

SoClean Air Purifier doesn't use chemicals and won’t produce any odor. The air goes through an intensive mechanical purifying process before it reaches you.

The 3-Stage Advanced Air Filtration Process
 

The SoClean Room Air Purifier has a 3-stage filter system:

• Carbon Filter: Absorbs all the VOC (volatile organic compounds)
• Pre Filter: Captures large particles
• Core Filter: Filters out ultra-fine particles

When the air goes through these three filters, all the viruses, bacteria, allergens, molds, dust, etc are filtered out and you get the purest of air to breathe. The air that reaches you is 99.9% pure.

SoClean Room Air Purifier Benefits
 

• Compact design
• Eliminates odors quickly
• Filters particulate matters as small as 10 nanometers
• Purify air of a whole room *Room Coverage Approx. 300 Square Feet

Prevents VOC and dangerous particulates from recirculating into your room

Setting Up the SoClean Air Purifier

Step 1: Install the Air Filters

Core Filter

• Slide the Core Filter into the G200 Core with the grill facing up.
• The filter clicks into place when properly installed.

Pre Filter

• Turn the G200 Core over, so the Celios logo is facing down. Remove the back panel at the bottom of the unit.
• Slide the Pre Filter into place with the arrows pointing toward the top of the Core. Make sure to push the Pre Filter completely into the Core so that the back panel can fully close.

Carbon Filter

• Remove the Carbon Filter tray from the Main Stand.
• Place the Carbon Filter into the tray as shown.
• Slide the tray back into position in the G200 Main Stand.

Step 2: Install the Lithium-Ion Smart Batteries

There are two slots for the lithium-ion smart batteries. These slots are above the Pre Filter you just installed. Pull the silver wire and rotate it upwards.
Take one lithium-ion smart battery and align the battery slots to the slots within the unit. The unit will beep when the first battery is correctly installed.
Take the second battery and do the same. You will not hear a beep with the second battery.
Place the silver wire back into position and replace the back cover onto the G200 Core unit.

Dock the G200 Core in the Main Stand

Plug the Power Adapter into the Main Stand and then to a powered electrical outlet.
Slide the G200 Core into the Main Stand. The control panel on the Core will be facing the same side as the Remote.
When you correctly dock the G200 Core in the Main Stand, the unit will beep (whether you have AC power on or not). If the G200 Core is not properly installed, it will not beep and will not sit properly within the Main Stand.
Charge the Batteries.

Step 3: Set Up the Bluetooth Remote Control

There are two AAA batteries provided, insert them into the Remote Control.
Turn on the SoClean Room Air Purifier and then press the Core button and hold for 6 seconds. You will hear a beep from the Core and the LED on its power button will flash. It has now entered the Bluetooth pairing mode.
Now, press the power button on the Remote Control and turn it on. You will notice a light flashing for a brief moment indicating that the remote control is now in pairing mode.
After a few seconds, you will notice that the LEDs on the Core and the remote control have stopped flashing which means that they are now paired with each other.