The ResMed Swift FX Nano is truly an innovative blend of comfort and performance. Experience the secure seal of a traditional nasal mask with the comfort and freedom of movement of a nasal pillow mask. By combining the headgear from the Swift FX nasal pillow mask and a traditional nasal cushion, CPAP patients can enjoy an open field of vision and secure seal in a lightweight, comfortable design.

A Lighter, More Compact Nasal Mask

The Swift FX Nano has been reduced down to its most fundamental design. Traditional nasal masks often include a stability bar that rests on the forehead. This sometimes creates a feeling of claustrophobia and a reduced field of vision for patients. Now, users can enjoy less mask contact and mask weight on their face while still enjoying features common to the best nasal masks on the market.

Clear View for Watching TV

The reduced design of the ResMed Swift FX Nano allows users to engage in pre-bedtime activities while using CPAP therapy. With a low profile nasal mask, CPAP therapy is not just for sleep anymore. You can watch TV, read, and wear eyeglasses without obstruction or discomfort.

Simple Setup for Easier Cleaning

The simple lock-and-key design on the top of the head ensures only two points of adjustment. Easier adjustment also means easier assembly and disassembly for cleaning and maintenance. By simplifying setup, users will find it much easier to thoroughly clean and sanitize their Swift FX Nano mask on a regular basis which ensures good CPAP health.

A Secure, More Comfortable Seal

The double wall seal of the Swift FX Nano nasal cushion gently cups the nose for the most comfortable CPAP therapy. Users won’t have to overtighten headgear to achieve a good seal. The cushion maintains a consistent seal all night long while providing the comfort for a peaceful sleep.

Quiet Venting During Exhalation

During CPAP therapy, users must exhale against their prescribed pressure. Sometimes, this can create a loud noise that disturbs you or your bed partner. The ResMed Swift FX Nano uses a diffusing system, located on the mask swivel elbow to help disperse exhaled air silently. Less mask noise means a more peaceful night’s sleep for you and your bed partner.

Free to Move While You Sleep

The Nano short tube pivots dynamically with your sleeping movement, so no matter how active a sleeper you happen to be, the ResMed Swift FX Nano moves with you to ensure a solid connection and consistent CPAP performance.

Easy to Remove and Comfortable Headgear

The headgear design of the Nano is identical to that of the Swift FX nasal pillow mask. The lightweight, minimal design allows for comfortable therapy all night long. It also features SoftWraps, additional padding for more facial comfort. And the easy slip-on design makes it effortless to take off in the middle of the night, if necessary.

ResMed Swift™ FX Nano Nasal CPAP Mask Fitting

1. Make sure the bottom of the cushion opening meets up with the bridge of the nose. Cover the nose with the mask.
2. Place the headgear over your head and pull it over your head.
3. Adjust the top strap first, but do not overtighten. The back strap should be just behind your head, and the mask should rest securely over your nose.
4. Put the mask cushion on your nose and adjust for comfort.
5. Attach the short tube assembly's free end to the tubing. If the mask leaks, adjust the back strap first and then work your way up to the top strap.

Removing Swift™ FX Nano Nasal CPAP Mask

Push the mask and headgear up and off the head removing the back strap.

Swift™ FX Nano Nasal CPAP Mask Disassembly

1. Gently detach the headgear.
2. Remove the mask cushion from the swivel ring.

The headgear straps may be cleaned as they are - they are not meant to be disassembled.

ResMed Swift™ FX Nano Nasal CPAP Mask Reassembly

1. Using your forefinger and thumb to stretch the inside of the mask cushion, insert the swivel ring into the mask cushion.
2. Allow the mask cushion to sit in the groove on the swivel ring. The mask cushion is correctly positioned when it is located in the swivel ring groove with no gaps. Ensure that the swivel ring is not pushed all the way into the mask cushion.
3. Rotate the elbow to ensure it moves freely in the swivel ring.
4. Thread the top strap through the top buckle with the notches facing up.
5. Hold the headgear arm with the opening facing you. Attache the headgear arm onto the node on the mask cushion. Make sure that the text on the headgear lines up with the text on the mask cushion.
6. Do the same thing on the other headgear arm. Make sure the straps on your headgear aren't bent.
7. Thread the back strap into both sides of the headgear without folding. Make sure the ResMed logo is facing out and the fastener is on the outside.

Cleaning Swift™ FX Nano Nasal CPAP Mask at Home

Hand washing the mask and headgear in warm water with a gentle soap is recommended. Mask parts should be thoroughly rinsed with water and air-dried away from direct sunshine.

Daily/After each use:

Facial oils should be removed from the cushion for a better mask seal. Hand wash the mask components (excluding headgear) or use CPAP mask wipes. Use a soft bristle brush to clean the vent or revolving sections like the swivel, swivel ring, or ball joint.

Weekly:

The headgear should be cleaned by hand. It can be cleaned without disassembling.

Package Includes:

Complete Mask

Nasal Cushion

Headgear

Short Tube

Soft Wraps