ResMed AirFit F30i Full Face CPAP Mask Review
Finding a comfortable sleeping position without compromising your CPAP mask seal is a common problem with CPAP patients. The ResMed AirFit F30i Full Face CPAP mask gives every active sleeper that flexibility and peace of mind. Read on to learn why a comfortable fit isn’t the only benefit this mask has to offer.
What is the ResMed AirFit F30i Full Face CPAP Mask with Headgear?
The innovative hollow frame design allows the airflow to pass through the elbow and into the frame and cushion, creating a more secure seal. A top-of-the-head tube connection also minimizes mask bulk around the face, so you enjoy more freedom of movement no matter what position you sleep in. These features and more ensure that this full face CPAP mask provides a more comfortable fit and feel.
Key Features of the ResMed AirFit F30i Full Face CPAP Mask with Headgear
It also features a one-size-fits-all headgear with magnetic clips that takes the guesswork out of fitting. UltraCompact cushions enhance comfort and a minimal design lets you have a clear field of vision while watching TV or reading. When you need to get up in the middle of the night, the quick release elbow makes bathroom breaks easy.
Benefits of Using the ResMed AirFit F30i Full Face CPAP Mask
If you have experienced nose bridge soreness with other masks, then this mask may offer a more comfortable alternative. The mask cushion design fits snugly under the nose so no more next-day red marks. The cushion shape and contour still retains a secure seal for consistent performance all night long.
How does the ResMed AirFit F30i Full Face CPAP Mask Compare to its Competitors?
See how some of the most important features in full face CPAP mask design are included in this CPAP mask.
|Features||Philips Respironics DreamWear Full Face CPAP Mask with Headgear||ResMed AirFit ™ F20 Full Face CPAP Mask with Headgear||Fisher & Paykel Simplus Full Face CPAP Mask with Headgear||ResMed AirFit F30i Full Face CPAP Mask with Headgear|
|Active Sleeper Friendly||8||8||9||10|
|Clear Field of Vision||9||10||8||10|
|Headgear Removal Ease||10||10||7||10|
|Ease of Cushion Replacement||10||10||10||10|
ResMed AirFit F30i Full Face CPAP Design
The minimal design benefits any CPAP patient who has experienced issues with claustrophobia. Reduced facial contact provides a sensation of no mask at all. The headgear design also brings the straps under the ears for a more comfortable and less cumbersome fit.
The AirFit F30i mask is intended to be used by patients weighing more than 66 lb (30 kg) who have been prescribed non-invasive positive airway pressure (PAP) therapy such as CPAP or bi-level therapy.
Storage & Disposal
Ensure that the mask is thoroughly clean and dry before storing it for any length of time. Store the mask in a dry place out of direct sunlight. This mask does not contain any hazardous substances and may be disposed of with your normal household refuse.
Is the ResMed AirFit F30i Full Face Mask Comfortable?
The design of the UltraCompact cushions offers optimal comfort even with varied sleeping positions.
The cushions remain secure at the bottom of the nose to prevent nasal bridge red marks and discomfort.
The one size fits all headgear allows for an easier fit the first time. Even when you remove the headgear at night, your adjustments stay intact for when you are ready to put the mask back on.
This CPAP mask is easy to maintain. The convenient design allows for easy disassembly and cleaning.
If your mask is connected to a device, simply disconnect the device air tubing from the mask elbow and follow the three easy steps.
- Undo the fastening tabs on the upper headgear straps and pull from the frame. Keep the magnetic clips attached to the lower headgear straps.
- Squeeze the side buttons on the elbow and detach from the frame.
- Grip the frame connector and lift to unclip from the cushion. Repeat on the other side.
Be sure to clean your mask cushions daily. The headgear, frame and elbow can be cleaned weekly.
A pressure flow curve indicates the set rate of flow through the mask's built-in vents. You can find the curve chart in your ResMed AirFit F30i user manual. Use the information from the chart to optimize your CPAP therapy.
Ease of Use
Fitting the ResMed AirFit F30i is easy.
- Connect the tubing from your CPAP machine to the mask elbow
- Place the cushion under your nose and pull the headgear and frame over your head
- Bring the lower headgear straps under your ears and attach the magnetic clips to the frame on both sides
- Pull the headgear straps evenly until the mask is secure and comfortable
List of Compatible CPAP Machines
The ResMed AirFit F30i Full Face CPAP mask is compatible with any CPAP machine. Use standard CPAP tubing to connect the mask and machine. Popular machines include:
- Philips Respironics DreamStation Auto CPAP
- Philips Respironics DreamStation Go Travel CPAP Machine
- ResMed AirSense 10 AutoSet CPAP Machine with Heated Humidifier
Is There a Warranty?
The RedMed AirFit F30i Full Face CPAP mask has a 90-day warranty from the date of purchase.
Where Can You Buy It?
Purchase the ResMed AirFit F30i Full Face mask online at The CPAP Shop. Our knowledgeable customer care team is available to answer any questions. Give us a call at 866-414-9700 or email us at email@example.com.
Is There a Risk-Free Trial Available?
The CPAP Shop offers a 30-day money-back guarantee on the ResMed AirFit F30i Full Face CPAP mask. Test it out and see if this is the right mask for you.
Is Headgear Included?
The ResMed AirFit F30i package includes:
- Mask Frame
- 2 Magnetic Clips
- Full Face Cushion
[magento store="1" sku="DSG500S11-BUNDLE, DSX500S11-BUNDLE, 37207-BUNDLE, 63332-BUNDLE" order="sku" dir="desc" limit="4" class="override"]