Using the SoClean 2 CPAP Sanitizing Machine
The CPAP Shop explains how the SoClean2 CPAP cleaner allows you to eliminate mask wipes and sanitize your CPAP equipment to be 99.9% bacteria-free!
The machine works with most CPAP machines and masks, and no water is needed. When you use the SoClean to sanitize your CPAP mask, tubing and reservoir, you do not have to disassemble the mask, tubing and humidifier. Instead of water, it uses activated oxygen to sanitize the mask, hose, and reservoir.
Using the SoClean 2
To do this, you simply connect the SoClean 2 to the back of your CPAP and place the mask inside the SoClean, with the tubing hooked to an adapter that is connected to your CPAP machine. Set the timer, and the SoClean makes a low humming sound for about 10 minutes until the cycle is finished.

SoClean 2 Uses Activated Oxygen to Clean
The machine works by pushing activated oxygen through the tubing and adapter, inside the reservoir of the CPAP machine, and then back to the SoClean 2 machine. The mask, tubing, and reservoir are cleaned along the way.
Activated oxygen kills bacteria, mold, virus, and fungus. When the machine adds a third atom of oxygen to the O2 oxygen that we breathe, it forms a new molecule of ozone (O3), otherwise known as activated oxygen, that destroys bacteria and viruses through oxidation.
After about two hours, the O3 reverts back into O2. The very first time you use your SoClean 2, you should pre-wash your mask, hose, and reservoir using the included Neutralizing Pre-Wash. Any time you add new equipment to your CPAP therapy, you should use the pre-wash on it.
How Often Should You Use Your SoClean2?
It is recommended that at a minimum, you clean your CPAP machine weekly. The SoClean2 can be used daily to help reduce bacteria build-up. SoClean 2 is so easy that you can increase your cleaning frequency to prevent illness and infection.
Maintaining Your SoClean2
To remove dust, you may wipe down the SoClean 2 with a damp cloth. The SoClean check valve assembly and filter cartridge should be replaced every 6 months. A reminder message on the display will appear after approximately 6 months, depending upon usage.
Keep Up On Your SoClean 2 Supplies
For replacement parts and accessories, visit The CPAP Shop. Stop getting sick from dirty CPAP equipment and make cleaning your CPAP equipment easier with the SoClean 2!
SoClean 2 CPAP Sanitizing Machine
• One of the most popular devices for sanitizing your CPAP equipment, using activated oxygen to kill 99% of germs and bacteria
Get Yours Today!
253 Comments Leave new
- « Previous
- 1
- …
- 13
- 14
- 15
I just purchased the Resvent iBreeze and think I hooked it up correctly to my Soclean (without any instructions), but when the cycle is finished the mask doesn’t have the same smell that I’m used to. Is it getting cleaned? What is the correct way to hook the CPAP to the Soclean?
Thanks!
Hi John, we definitely recommend using the instructions to make sure you are cleaning your equipment properly. If you no longer have the user manual, you can find it on SoClean’s website here. If you have any additional questions, you can reach out to The CPAP Shop at 866-414-9700. Thanks!
Do i put the whole head gear in when running?
Hi James, yes, the SoClean 2 can sanitize most CPAP and BiPAP machines, all types of CPAP masks, all hoses, and headgear.
Do I need to drain the water tank on the Cpap befor using the so clean?
Hi John! If you have water in your reservoir, the tube needs to be submerged, in order to get the activated oxygen to clean the water. However, you can also run the SoClean without water in the reservoir
What required field is missing? I really need to understand if the unit is not working properly!
What would cause pink residue (pre-mold?) in the reservoir if the So Clean unit is used daily?
Hi Lisa, before you started sanitizing your products in the SoClean did you use the -pre-wash on your cpap items?